Share Your Research, Maximize Your Social Impacts
Main Menu
Searching By
PARTNERS
ICMEEM 2011 - The 2011 International Conference of Manufacturing Engineering and Engineering Management
Date2011-07-06
Deadline2011-03-06
VenueLondon, UK - United Kingdom 
Keywords
Websitehttps://www.iaeng.org
Topics/Call fo Papers
The 2011 International Conference of Manufacturing Engineering and Engineering Management
London, U.K., 6-8 July, 2011
Conferences Publications Membership About IAENG FAQ Contact Us
The 2011 International Conference of Manufacturing Engineering and Engineering Management (ICMEEM'11) will take place in London, U.K., 6-8 July, 2011.
The conference ICMEEM'11 is held under the World Congress on Engineering 2011. The WCE 2011 is organized by the International Association of Engineers (IAENG), and serves as good platforms for the engineering community members to meet with each other and to exchange ideas. The last IAENG conferences attracted more than one thousand participants from over 30 countries. All submitted papers will be under peer review and accepted papers will be published in the conference proceeding (ISBN: 978-988-18210-6-5). The abstracts will be indexed and available at major academic databases. The accepted papers will also be considered for publication in the special issues of the journal Engineering Letters, in IAENG journals and in edited books.
Calls for Manuscript Submissions
Proposals for special conference sessions and tutorials deadline: 30 December, 2010
Draft Paper Submission Deadline: 6 March, 2011
Camera-Ready Papers Due & Registration Deadline: 31 March, 2011
WCE 2011: 6-8 July, 2011
The topics of the ICMEEM'11 include, but not limited to, the following:
Engineering Physiology
Biomedical Instrumentation
Engineering Statistics
Quality Management Systems
Maintenance Engineering
Reliability and Quality Control
Engineering Experimental Design
Integrated Product Engineering
Engineering Risk and Decision Analysis
Computer Supported Collaborative Engineering
Human Factors and Ergonomics
Computer-Aided Design
Computer Aided Manufacturing
Computer Simulation Methods
Facilities Design and Logistics
Manufacturing Processes and Methods
Information Systems for the Manufacturing
Quality and Productivity Management
Optimization Methods
Intelligent Engineering Systems
Engineering Management and Leadership
Management Science
Managerial economics
Systems thinking and analysis
Optimization
Integer programming
Linear programming
Nonlinear programming
Assignment problem
Transportation network design
Simulation
Statistical Analysis
Stochastics Modelling
Reliability and maintenance
Queueing theory
Game theory
Graph theory
OR algorithms and software developments
OR applications and case studies
The ICMEEM Program Committee
ICMEEM Conference Committee
Prof. Munir Ahmad
Professor, School of Science & Technology, University of Teesside, UK
Dr. Ioannis Angeli
Lecturer, Higher Technical Institute, Mechanical & Marine Engineering Department, Nicosia, Cyprus
Prof. Paul M Braiden (FREng; ICMEEM honorary co-chair)
Emeritus Professor of Engineering,
School of Mechanical and Systems Engineering, Newcastle University, UK
Dr Peter Fenn
Senior Lecturer, School of Mechanical, Aerospace and Civil Engineering, University of Manchester, UK
Dr Yee Mey Goh
Research Officer, Innovative Manufacturing Research Centre,
Department of Mechanical Engineering, University of Bath, UK
Dr. Ben James Hicks
Senior Research Fellow, Innovative Manufacturing Research Centre, Department of Mechanical Engineering, University of Bath, UK
Professor Simon Hodgson ( co-chair)
Assistant Dean and Professor of Functional & Advanced Materials,
School of Science and Technology, University of Teesside, UK
Professor Huosheng Hu
Department of Computer Science, University of Essex, U.K.
Dr. Winifred Ijomah
Research Scientist, Innovative Manufacturing Centre, Department of Mechanical Engineering, University of Bath, UK
Dr. M. Latif
Senior Lecturer, Department of Engineering and Technology, Manchester Metropolitan University, United Kingdom
Prof. Lin Li (FIEE; co-chair)
Professor, Chair of Laser Engineering, Director of Laser Processing Research Centre,
School of Mechanical, Aerospace and Civil Engineering, The University of Manchester, UK
Dr. Ioannides Marinos
Lecturer, Computer Studies Department, Higher Technical Institute, Cyprus
Prof. Syed H. Masood
Professor and Program Coordinator (Advanced Manufacturing Technology), Swinburne University of Technology, Australia
Dr. Paul Mativenga
Lecturer, School of Mechanical, Aerospace and Civil Engineering, The University of Manchester, UK
Dr Samir Mekid (co-chair)
Lecturer, School of Mechanical, Aerospace and Civil Engineering, The University of Manchester, UK
Prof. Farhad Nabhani
Professor - Biomechanics and Manufacturing, School of Science and Technology,
MSc Course Leader, University of Teesside, UK
Dr. Mori Nejad Vaezi-Nejad
Senior Lecturer in Communications Technology, Department of CCTM at North Campus, London Metropolitan University, UK
Prof. S. Ayse Ozel
Department of Industrial Engineering, Engineering and Architecture Faculty, Uludag University, Turkey
Prof. Miquel Angel Piera (co-chair)
Professor of the Universitat Autonoma de Barcelona (UAB), director of the McLeod Institute for Simulation Sciences - Spanish Center, Spain
Dr Steve Plummer
Principal Lecturer, School of Engineering, University of Brighton, UK
Dr. H.S. Qi
School of Engineering, Design & Technology, University of Bradford, UK
Dr. Muhammad Imran Rafiq
Lecturer in Civil Engineering Structures, School of Engineering, University of Surrey, UK
Professor Vinesh Raja (FIMechE, FRSA, FRSH)
Professorial Fellow and Head of Informatics, Warwick Manufacturing Group,
International Manufacturing Centre, University of Warwick, UK
Prof. Rajat Roy
Professorial Fellow, Warwick Manufacturing Group, University of Warwick, UK
Dr. Tim Short (co-chair)
Senior Lecturer in Engineering Design, Department of Engineering, University of Liverpool, United Kingdom
Dr. Robert Trimble
Principal Lecturer in Engineering Operations Management, University of Sunderland, School of Computing & Technology, United Kingdom
Dr. Qing Wang
Lecturer, School of Engineering, Durham University, United Kingdom
Dr. Philip Webb
Associate Professor, School Of Mechanical, Materials and Manufacturing Engineering, The University of Nottingham, UK
Prof. David Wimpenny
Professor and Head of Rapid Prototyping, Faculty of Computing Sciences & Engineering, The Innovation Centre, De Montfort University, UK
Dr. Roy Woodhead
Senior Lecturer, Technology Management, School of Technology, Oxford Brookes University, UK
Dr. Nan Zhang
Lecturer, Centre for Process Integration,
School of Chemical Engineering and Analytical Science, University of Manchester, UK
Dr Yuyang Zhao
Researcher, Knowledge and Information Management (KIM) Grand Challenge Project, University of Cambridge, and
Research Officer, Innovative Manufacturing Research Centre, Department of Mechanical Engineering, University of Bath, UK
WCE Congress Co-chairs
Prof. Alexander M. Korsunsky
Professor of Engineering Science
Dean, Trinity College
Department of Engineering Science, University of Oxford, UK
Prof. Andrew Hunter
Professor & Head of Department
Head of Vision and AI Research Group,
Dean of Research,
Department of Computing and Informatics,
Lincoln University, UK
Prof. David WL Hukins, CPhys, FinstP, FIPEM, FRSE
Professor of Bio-medical Engineering
Head of Department of Mechanical & Manufacturing Engineering,
University of Birmingham, UK
Prof. Len Gelman (honorary co-chair)
Professor and Chair in Vibro-Acoustic Monitoring,
Chairman of the Condition Monitoring Technical Committee, the British Institute of NDT,
Director, Centre of Vibro-Acoustics and Fatigue,
Director, International Institute of Acoustics and Vibration (USA)
Cranfield University, UK
Dr. Christopher John Hogger (honorary co-chair)
Senior Lecturer
Department of Computing
Imperial College London, UK
Prof. Darek J. Ceglarek (ICMEEM honorary co-chair)
Professor, International Manufacturing Centre, University of Warwick, UK
Professor, Department of Industrial and Systems Engineering
The University of Wisconsin-Madison, USA
Fellow of CIRP; Associate Editor, IEEE Transactions on Automation Science and Engineering, and ASME Transactions on Manufacturing Science and Engineering
Dr. Stephen Payne (ICSBB honorary co-chair)
University Lecturer in BioMedical Engineering
Dean of Degrees Keble College, Head of Physiological Understanding through Modelling, Monitoring and Analysis Group,
Department of Engineering Science, University of Oxford, UK
London, U.K., 6-8 July, 2011
Conferences Publications Membership About IAENG FAQ Contact Us
The 2011 International Conference of Manufacturing Engineering and Engineering Management (ICMEEM'11) will take place in London, U.K., 6-8 July, 2011.
The conference ICMEEM'11 is held under the World Congress on Engineering 2011. The WCE 2011 is organized by the International Association of Engineers (IAENG), and serves as good platforms for the engineering community members to meet with each other and to exchange ideas. The last IAENG conferences attracted more than one thousand participants from over 30 countries. All submitted papers will be under peer review and accepted papers will be published in the conference proceeding (ISBN: 978-988-18210-6-5). The abstracts will be indexed and available at major academic databases. The accepted papers will also be considered for publication in the special issues of the journal Engineering Letters, in IAENG journals and in edited books.
Calls for Manuscript Submissions
Proposals for special conference sessions and tutorials deadline: 30 December, 2010
Draft Paper Submission Deadline: 6 March, 2011
Camera-Ready Papers Due & Registration Deadline: 31 March, 2011
WCE 2011: 6-8 July, 2011
The topics of the ICMEEM'11 include, but not limited to, the following:
Engineering Physiology
Biomedical Instrumentation
Engineering Statistics
Quality Management Systems
Maintenance Engineering
Reliability and Quality Control
Engineering Experimental Design
Integrated Product Engineering
Engineering Risk and Decision Analysis
Computer Supported Collaborative Engineering
Human Factors and Ergonomics
Computer-Aided Design
Computer Aided Manufacturing
Computer Simulation Methods
Facilities Design and Logistics
Manufacturing Processes and Methods
Information Systems for the Manufacturing
Quality and Productivity Management
Optimization Methods
Intelligent Engineering Systems
Engineering Management and Leadership
Management Science
Managerial economics
Systems thinking and analysis
Optimization
Integer programming
Linear programming
Nonlinear programming
Assignment problem
Transportation network design
Simulation
Statistical Analysis
Stochastics Modelling
Reliability and maintenance
Queueing theory
Game theory
Graph theory
OR algorithms and software developments
OR applications and case studies
The ICMEEM Program Committee
ICMEEM Conference Committee
Prof. Munir Ahmad
Professor, School of Science & Technology, University of Teesside, UK
Dr. Ioannis Angeli
Lecturer, Higher Technical Institute, Mechanical & Marine Engineering Department, Nicosia, Cyprus
Prof. Paul M Braiden (FREng; ICMEEM honorary co-chair)
Emeritus Professor of Engineering,
School of Mechanical and Systems Engineering, Newcastle University, UK
Dr Peter Fenn
Senior Lecturer, School of Mechanical, Aerospace and Civil Engineering, University of Manchester, UK
Dr Yee Mey Goh
Research Officer, Innovative Manufacturing Research Centre,
Department of Mechanical Engineering, University of Bath, UK
Dr. Ben James Hicks
Senior Research Fellow, Innovative Manufacturing Research Centre, Department of Mechanical Engineering, University of Bath, UK
Professor Simon Hodgson ( co-chair)
Assistant Dean and Professor of Functional & Advanced Materials,
School of Science and Technology, University of Teesside, UK
Professor Huosheng Hu
Department of Computer Science, University of Essex, U.K.
Dr. Winifred Ijomah
Research Scientist, Innovative Manufacturing Centre, Department of Mechanical Engineering, University of Bath, UK
Dr. M. Latif
Senior Lecturer, Department of Engineering and Technology, Manchester Metropolitan University, United Kingdom
Prof. Lin Li (FIEE; co-chair)
Professor, Chair of Laser Engineering, Director of Laser Processing Research Centre,
School of Mechanical, Aerospace and Civil Engineering, The University of Manchester, UK
Dr. Ioannides Marinos
Lecturer, Computer Studies Department, Higher Technical Institute, Cyprus
Prof. Syed H. Masood
Professor and Program Coordinator (Advanced Manufacturing Technology), Swinburne University of Technology, Australia
Dr. Paul Mativenga
Lecturer, School of Mechanical, Aerospace and Civil Engineering, The University of Manchester, UK
Dr Samir Mekid (co-chair)
Lecturer, School of Mechanical, Aerospace and Civil Engineering, The University of Manchester, UK
Prof. Farhad Nabhani
Professor - Biomechanics and Manufacturing, School of Science and Technology,
MSc Course Leader, University of Teesside, UK
Dr. Mori Nejad Vaezi-Nejad
Senior Lecturer in Communications Technology, Department of CCTM at North Campus, London Metropolitan University, UK
Prof. S. Ayse Ozel
Department of Industrial Engineering, Engineering and Architecture Faculty, Uludag University, Turkey
Prof. Miquel Angel Piera (co-chair)
Professor of the Universitat Autonoma de Barcelona (UAB), director of the McLeod Institute for Simulation Sciences - Spanish Center, Spain
Dr Steve Plummer
Principal Lecturer, School of Engineering, University of Brighton, UK
Dr. H.S. Qi
School of Engineering, Design & Technology, University of Bradford, UK
Dr. Muhammad Imran Rafiq
Lecturer in Civil Engineering Structures, School of Engineering, University of Surrey, UK
Professor Vinesh Raja (FIMechE, FRSA, FRSH)
Professorial Fellow and Head of Informatics, Warwick Manufacturing Group,
International Manufacturing Centre, University of Warwick, UK
Prof. Rajat Roy
Professorial Fellow, Warwick Manufacturing Group, University of Warwick, UK
Dr. Tim Short (co-chair)
Senior Lecturer in Engineering Design, Department of Engineering, University of Liverpool, United Kingdom
Dr. Robert Trimble
Principal Lecturer in Engineering Operations Management, University of Sunderland, School of Computing & Technology, United Kingdom
Dr. Qing Wang
Lecturer, School of Engineering, Durham University, United Kingdom
Dr. Philip Webb
Associate Professor, School Of Mechanical, Materials and Manufacturing Engineering, The University of Nottingham, UK
Prof. David Wimpenny
Professor and Head of Rapid Prototyping, Faculty of Computing Sciences & Engineering, The Innovation Centre, De Montfort University, UK
Dr. Roy Woodhead
Senior Lecturer, Technology Management, School of Technology, Oxford Brookes University, UK
Dr. Nan Zhang
Lecturer, Centre for Process Integration,
School of Chemical Engineering and Analytical Science, University of Manchester, UK
Dr Yuyang Zhao
Researcher, Knowledge and Information Management (KIM) Grand Challenge Project, University of Cambridge, and
Research Officer, Innovative Manufacturing Research Centre, Department of Mechanical Engineering, University of Bath, UK
WCE Congress Co-chairs
Prof. Alexander M. Korsunsky
Professor of Engineering Science
Dean, Trinity College
Department of Engineering Science, University of Oxford, UK
Prof. Andrew Hunter
Professor & Head of Department
Head of Vision and AI Research Group,
Dean of Research,
Department of Computing and Informatics,
Lincoln University, UK
Prof. David WL Hukins, CPhys, FinstP, FIPEM, FRSE
Professor of Bio-medical Engineering
Head of Department of Mechanical & Manufacturing Engineering,
University of Birmingham, UK
Prof. Len Gelman (honorary co-chair)
Professor and Chair in Vibro-Acoustic Monitoring,
Chairman of the Condition Monitoring Technical Committee, the British Institute of NDT,
Director, Centre of Vibro-Acoustics and Fatigue,
Director, International Institute of Acoustics and Vibration (USA)
Cranfield University, UK
Dr. Christopher John Hogger (honorary co-chair)
Senior Lecturer
Department of Computing
Imperial College London, UK
Prof. Darek J. Ceglarek (ICMEEM honorary co-chair)
Professor, International Manufacturing Centre, University of Warwick, UK
Professor, Department of Industrial and Systems Engineering
The University of Wisconsin-Madison, USA
Fellow of CIRP; Associate Editor, IEEE Transactions on Automation Science and Engineering, and ASME Transactions on Manufacturing Science and Engineering
Dr. Stephen Payne (ICSBB honorary co-chair)
University Lecturer in BioMedical Engineering
Dean of Degrees Keble College, Head of Physiological Understanding through Modelling, Monitoring and Analysis Group,
Department of Engineering Science, University of Oxford, UK
Other CFPs
- The 2011 International Conference of Mechanical Engineering
- The 2011 International Conference of Information Security and Internet Engineering
- The 2011 International Conference of Information Engineering
- The 2011 International Conference of Financial Engineering
- The 2011 International Conference of Electrical and Electronics Engineering
Last modified: 2010-12-12 18:02:40