ICME 2011 - The 2011 International Conference of Mechanical Engineering

The 2011 International Conference of Mechanical Engineering

London, U.K., 6-8 July, 2011




Conferences Publications Membership About IAENG FAQ Contact Us




The 2011 International Conference of Mechanical Engineering (ICME'11) will take place in London, U.K., 6-8 July, 2011.




The conference ICME'11 is held under the World Congress on Engineering 2011. The WCE 2011 is organized by the International Association of Engineers (IAENG), and serves as good platforms for the engineering community members to meet with each other and to exchange ideas. The last IAENG conferences attracted more than one thousand participants from over 30 countries. All submitted papers will be under peer review and accepted papers will be published in the conference proceeding (ISBN: 978-988-18210-6-5). The abstracts will be indexed and available at major academic databases. The accepted papers will also be considered for publication in the special issues of the journal Engineering Letters, in IAENG journals and in edited books.




Calls for Manuscript Submissions



Proposals for special conference sessions and tutorials deadline: 30 December, 2010
Draft Paper Submission Deadline: 6 March, 2011
Camera-Ready Papers Due & Registration Deadline: 31 March, 2011
WCE 2011: 6-8 July, 2011




The topics of the ICME'11 include, but not limited to, the following:






Aerodynamics
Fluid Dynamics
Compressible Flows
Computational Mechanics
Biomechanics
Automotive Engineering
Heat and Mass Transfer
Nanomaterial Engineering
Plasticity Mechanics
Fracture
Geomechanics
Multibody Dynamics
Nonlinear Dynamics
Structural Dynamics
Vibrations
Acoustics
Noise Control
Material Engineering
Transport Phenomena
Manufacturing Process
Mechatronics






The ICME Program Committee






ICME Conference Committee




Dr Rehan Ahmed
Lecturer in mechanical engineering, Heriot-Watt University, School of Engineering & Physical Sciences, UK

Dr. R.K. AL-Dadah
Lecturer, Mechanical and Manufacturing Engineering Department,
School of Engineering, University of Birmingham, UK

Dr. Carl Anthony
Research scientist, Department of Mechanical and Manufacturing Engineering, University of Birmingham, UK

Dr. Gaetano Burriesci
Lecturer, Department of Mechanical Engineering, University College London, UK

Professor Colin Bailey (FICE; co-chair)
Professor of Structural Engineering,
School of Mechanical, Aerospace and Civil Engineering, The University of Manchester, UK

Dr. Alastair Cooke
Senior Lecturer, Dynamics, Simulation and Control Group, Department of Aerospace Sciences, School of Engineering, Cranfield University, UK

Dr. Rajarshi Das
Research Scientist, CSIRO Mathematical and Information Sciences, Australia

Dr Daniele Dini (D. Phil. Oxford)
Lecturer of Mechanical Engineering (Tribology Group), Department of Mechanical Engineering
Imperial College London, UK

Dr. Hongbiao Dong (Royal Society Industry Fellow (Rolls-Royce))
Lecturer in Materials, Department of Engineering, University of Leicester, UK

Professor Dimitris Drikakis (co-chair; FRAeS, FIoN)
Head of Aerospace Sciences Department
Chair of Fluid Mechanics and Computational Science
Cranfield University, School of Engineering, United Kingdom

Dr. John Durodola (FIMechE; co-chair)
Head of Mechanical Engineering Department, Reader in Stress Analysis and Materials,
Oxford Brookes University, UK

Dr. Taha M.S. Elhag
Lecturer and Director of Construction Management Programme, School of Mechanical, Aerospace & Civil Engineering,
Project Management Division, University of Manchester, UK

Dr Kamran Etebar
Principal Lecturer and Director of Undergraduate Programmes, Faculty of Engineering, Kingston University, UK

Prof. Graham H. Galbraith (co-chair)
Pro Vice-Chancellor International
Glasgow Caledonian University, UK

Dr Roy Garwood
Head of Engineering, Faculty of Advanced Technology, University of Glamorgan, UK

Professor Philip H Gaskell (co-chair)
Professor of Fluid Mechanics
School of Mechanical Enginnering, University of Leeds, UK

Dr Yakun Guo
Lecturer, Department of Engineering, University of Aberdeen, King's College, UK

Dr H Hadavinia
Senior Lecturer, Faculty of Engineering, Kingston University, UK

Dr. Y. Hardalupas (co-chair)
Reader in Multiphase Flows, Mechanical Engineering Department, Imperial College London, UK

Prof. Li He (Ph.D Cambridge; co-chair)
Professor and Chair of Thermodynamics and Fluid Mechanics, School of Engineering, Durham University, UK

Dr Khalid Hussain
Director of Studies in Mechanical & Automotive Engineering, School of Engineering, Design & Technology (EDT4), University of Bradford, UK

Dr. Mohammad Jaffar
Lecturer, Loughborough University, UK

Dr. Artur J. Jaworski
Senior Lecturer, EPSRC Advanced Research Fellow,
School of Mechanical, Aerospace and Civil Engineering, University of Manchester, UK

Dr. Mohammed Khan
Associate Dean - International Programmes, School of Engineering, Design and Technology, University of Bradford, England

Dr Konstantinos Kontis (co-chair)
Senior Lecturer and Head of S.I. Group & Laboratory, School of MACE, University of Manchester, UK

Dr Tina Lekakou
Senior Lecturer, School of Engineering, University of Surrey, UK

Dr. Terese Lovas
Lecturer in Future Energy Conversion Technologies, Department of Engineering, Queen Mary, University of London;
College Lecturer in Engineering, Member of College Council, Churchill College, University of Cambridge, UK

Dr. Warren Manning
Lecturer, Engineering and Technology, Manchester Metropolitan University, UK

Professor Paul Maropoulos
Professor of Innovative Manufacturing, Director of the Global Digital Enterprise Research Laboratory,
Department of Mechanical Engineering, University of Bath, UK

Dr Samir Mekid
Lecturer, School of Mechanical, Aerospace and Civil Engineering, The University of Manchester, UK

Prof. Farhad Nabhani CSE, ME, MEEM, SBB co-chair
Professor - Biomechanics and Manufacturing, School of Science and Technology,
MSc Course Leader, University of Teesside, UK

Dr. Oluremi Olatunbosun
Senior Lecturer in Mechanical Engineering and Head, Vehicle Dynamics Laboratory,
Department of Mechanical and Manufacturing Engineering, The University of Birmingham, UK

Dr. Joshua R Omer
Research scientist, Division of Civil Engineering, Faculty of Advanced Technology, University of Glamorgan, United Kingdom

Prof. A. Alper Ozalp
Associate Professor of Mechanical Engineering, Engineering and Architecture Faculty, Uludag University, Turkey

Dr. Panagiota Pantazopoulou
Senior Consultant, Building Rersearch Establishment, Garston, Watford, United Kingdom

Dr. William K-S. Pao
Lecturer, School of Mechanical, Aerospace and Civil Engineering, The University of Manchester, UNITED KINGDOM

Professor Philip D Prewett (DPhil Oxford, FInstP, FIoN, FRSA; co-chair & session chair (Microelectromechanical systems))
Lucas Professor of MicroEngineering and Nanotechnology, Former Joint Head of Department, Department of Mechanical Engineering and Manufacturing, University of Birmingham, UK

Dr. Muhammad Imran Rafiq
Lecturer in Civil Engineering Structures, School of Engineering, University of Surrey, UK

Dr. George F Rosala
Design Programme Director, School of Engineering, Design & Technology, University of Bradford, UK

Dr. M. Necip Sahinkaya
Reader in Mechanical Engineering, Department of Mechanical Engineering, University of Bath, U.K.

Dr. Stephen Samuel
Senior Lecturer in Mechanical/Automotive Engineering, School of Technology, Oxford Brookes University, UK

Prof. Lakmal Seneviratne (co-chair)
Professor of Mechatronics and Head of the Division of Engineering,
King's College London, UK

Dr. Evgeniy Shapiro
Lecturer, Fluid Mechanics and Computational Science Group, Cranfield University, School of Engineering, United Kingdom

Dr. Arezki Slaouti
Senior Lecturer in Thermofluids Engineering,
Department of Engineering and Technology, Manchester Metropolitan University, UK

Dr. John Sweeney
Reader in Polymer Mechanics, School of Engineering, Design and Technology, University of Bradford, UK

Prof. Magd Abdel Wahab (co-chair)
Professor of Civil Engineering, Xios University College Limburg, Belgium

Prof Sergei V. Utyuzhnikov
Senior Research Fellow, School of Mechanical, Aerospace & Civil Engineering, University of Manchester, UK

Dr. Dmitry Vlasenko
Assistant professor , Otto-von-Guericke-University Magdeburg, Institute of Mobile Systems, Germany

Dr Yawei Wang
Senior Lecturer in Automotive Engineering, Faculty of Engineering, Kingston University, UK

Dr. Dongsheng Wen
Reader in Nanotechnology and Energy Engineering, School of Engineering and Materials Science, Queen Mary University of London, UK

Dr Hongming Xu (DIC, CEng, FIMechE; co-chair)
Reader in Automotive Engineering, Department of Mechanical Engineering, The University of Birmingham, UK

WCE Congress Co-chairs


Prof. Alexander M. Korsunsky
Professor of Engineering Science
Dean, Trinity College
Department of Engineering Science, University of Oxford, UK

Prof. Andrew Hunter
Professor & Head of Department
Head of Vision and AI Research Group,
Dean of Research,
Department of Computing and Informatics,
Lincoln University, UK

Prof. David WL Hukins, CPhys, FinstP, FIPEM, FRSE
Professor of Bio-medical Engineering
Head of Department of Mechanical & Manufacturing Engineering,
University of Birmingham, UK

Prof. Len Gelman (honorary co-chair)
Professor and Chair in Vibro-Acoustic Monitoring,
Chairman of the Condition Monitoring Technical Committee, the British Institute of NDT,
Director, Centre of Vibro-Acoustics and Fatigue,
Director, International Institute of Acoustics and Vibration (USA)
Cranfield University, UK

Dr. Christopher John Hogger (honorary co-chair)
Senior Lecturer
Department of Computing
Imperial College London, UK

Prof. Darek J. Ceglarek (ICMEEM honorary co-chair)
Professor, International Manufacturing Centre, University of Warwick, UK
Professor, Department of Industrial and Systems Engineering
The University of Wisconsin-Madison, USA
Fellow of CIRP; Associate Editor, IEEE Transactions on Automation Science and Engineering, and ASME Transactions on Manufacturing Science and Engineering

Dr. Stephen Payne (ICSBB honorary co-chair)
University Lecturer in BioMedical Engineering
Dean of Degrees Keble College, Head of Physiological Understanding through Modelling, Monitoring and Analysis Group,
Department of Engineering Science, University of Oxford, UK