2014 - Webonar on Design Inputs - Design Outputs Traceability Matrix - Principles of Lean Documents and Lean Configuration

Design controls involve the translation of user requirements (aka Voice of the Customer) into specific technical requirements as design inputs. These design inputs then form the basis of the design specification, which becomes the design output. Since design controls requires tracing backwards and forwards in order to link the requirements to their satisfaction, a problem faced by many companies is in having to maintain duplicate information across many controlled documents. This repetition is a major source of inconsistencies and errors.
In this webinar, we apply the Theory of Lean documents and its corollary Theory of Lean Configuration to present a fresh approach to these linked and cascading documents.
If you are constantly struggling to create, manage, and maintain all of the information found in Design Inputs, Design Outputs, and traceability matrices, all of which are often redundant, repetitive, and clustered together in an awkward manner, this webinar is something that will give you a different perspective and a very different approach that you can use.
If your design and manufacturing resources are spending too much time on documentation and not enough time on actual design and manufacturing you as a manager need to be looking for ways to simplify their work.
This webinar presents a new approach yet is based on solid principles and proven practices.
Areas Covered in the Session :
Brief introduction to Lean Documents and Lean Configuration
Quality System Regulation, 21 CFR Part 820, and ISO 13485 as these apply to design control documents
Traceability Matrix
Applying lean document and lean configuration principles to the above
Bringing it all together
Who Will Benefit:
Managers, Supervisors, Directors, and Vice-Presidents in the areas of:
Research & Development
Manufacturing Engineering
Design Assurance
Quality Assurance
Operations
Document Control
Price Tags:
Live
Single Live : For One Participant
$ 249
Corporate Live : For Max. 10 Participants
$ 899
Recording
Single REC : For One Participant - Unlimited Access for 6 Months
$ 299
Speaker Profile
José Mora is a Principal Consultant specializing in Manufacturing Engineering and Quality Systems. For over 30 years he has worked in the medical device and life sciences industry specializing in manufacturing, process development, tooling, and quality systems. Prior to working full time as a consulting partner for Atzari Consulting, José served as Director of Manufacturing Engineering at Boston Scientific and as Quality Systems Manager at Stryker Orthopedics, where he introduced process performance, problem solving, and quality system methodologies
Reach Us
Compliance Trainings
5939 Candlebrook Ct,
Mississauga, ON L5V 2V6,
Canada
416-915-4458
Email : support-AT-compliancetrainings.com