Overview: Design History Files (DHF), Device Maste 2012 - Design History File (DHF), the Device Master Record (DMR) and the Device History Record (DHR) ? Principles on Lean Documents and Lean Configuration - Webinar By GlobalCompliancePanel
Date2012-07-31
Deadline2012-07-31
VenueWilmington, USA - United States
KeywordsDesign History File,Device Master Record,Device History Record,Technical File,Regulatory Documents,DHF, DMR, DHR,TF
Websitehttp://alturl.com/kcyxc
Topics/Call fo Papers
Overview: Design History Files (DHF), Device Master Records (DMR), and Device History Records (DHR) are key building blocks used in the design, development, manufacturing, and cGMP compliance for the Medical Device Industry. Too often, these are cluttered, confusing, and cause many errors due to the way they are created, organized, and managed.
This webinar applies the Theory of Lean Documents and also formulates a corresponding Theory of Lean Configuration to these key elements of medical device documents.
Why you should attend: Do you find yourself constantly struggling to create, manage, and maintain all of the information found in DHFs, DMRs, and DHRs - which is often redundant, repetitive, and chained together in a cumbersome way? Do you find that your design and manufacturing resources are spending way too much time on documentation and not enough on engineering and design? This webinar presents a fresh new approach based upon solid principles and proven practices - as well as an alternative that avoids many of the pitfalls of traditional ways of preparing these documents.
Areas Covered In the Session:
Brief introduction to Lean Documents and Lean Configuration
Quality System Regulation, 21 CFR Part 820, as it applies to DHF, DMR, and DHR
Design History Files (DHF) content, development, and management
Device Master Records (DMR) content, development, and management
Device History Record (DHR) content, development, and management
Applying lean principles to creating, developing, and managing a DHF
Applying lean principles to creating, developing, and managing a DMR
Applying lean principles to creating, developing, and managing DHRs
Who will benefit: Managers, Supervisors, Directors, and Vice-Presidents in the areas of:
R&D
Manufacturing Engineering
Quality Assurance
Operations
Document Control
José Mora is a Principal Consultant specializing in Manufacturing Engineering and Quality Systems. For over 29 years he has worked in the medical device industry specializing in manufacturing, process development, tooling, and quality systems. Prior to working full time as a consulting partner for Atzari Consulting, José served as Director of Manufacturing Engineering at Boston Scientific and as Quality Systems Manager at Stryker Orthopedics, where he introduced process performance, problem solving, and quality system methodologies. During that time he prepared a white paper on the application of lean manufacturing methods to the creation and management of controlled documents and a template for strategic deployment. José led the launch of manufacturing at a start-up urology products company as Director of Manufacturing for UroSurge, Inc. at the University of Iowa’s business incubator park in Coralville, IA, creating a world-class medical device manufacturing operation, with JIT, kanban systems, visual workplace and lean manufacturing practices. José worked for 10 years at Cordis Corporation, now a Johnson & Johnson company, where he led the successful tooling, process development and qualification of Cordis’ first PTA (percutaneous transluminal angioplasty) catheter. His medical device experience includes surgical instruments, PTA & PTCA dilatation and guiding catheters, plastic surgery implants and tissue expanders, urology implants and devices for the treatment of incontinence, delivery systems for brachytherapy, orthopaedic implants and instruments, and vascular surgery grafts and textiles. During his time at Cordis, José managed the Maintenance and Facilities Department, taking that operation to a level rated as “tops” by the UK Department of Health and Social Services (DHSS) during one of their intensive audits. Jose managed Manufacturing Engineering as part of the Guiding Catheter Core Team of managers, a team that took the Cordis Guiding Catheter business to lead the market, bringing it up from fourth place. By introducing world-class techniques, the Guiding Catheter design and manufacturing was completely re-engineered for robust design and tooling, under Jose’s leadership. He was also instrumental and played a leadership role in the complete re-engineering of the Tooling Control System, including design drafting, the tool shop and technical support. Wherever he has worked, he has a track record of introducing world-class methodologies such as Kepner-Tregoe, Taguchi techniques, Theory of Constraints, Lean Manufacturing, Five Ss (Visual Workplace), process validation to GHSS standards, and similar approaches.
Price List:
Live : $245.00
Corporate live : $495.00
Recorded : $295.00
Phone: 800-447-9407
Fax: 302-288-6884
webinars-AT-globalcompliancepanel.com
http://www.globalcompliancepanel.com
http://alturl.com/kcyxc
This webinar applies the Theory of Lean Documents and also formulates a corresponding Theory of Lean Configuration to these key elements of medical device documents.
Why you should attend: Do you find yourself constantly struggling to create, manage, and maintain all of the information found in DHFs, DMRs, and DHRs - which is often redundant, repetitive, and chained together in a cumbersome way? Do you find that your design and manufacturing resources are spending way too much time on documentation and not enough on engineering and design? This webinar presents a fresh new approach based upon solid principles and proven practices - as well as an alternative that avoids many of the pitfalls of traditional ways of preparing these documents.
Areas Covered In the Session:
Brief introduction to Lean Documents and Lean Configuration
Quality System Regulation, 21 CFR Part 820, as it applies to DHF, DMR, and DHR
Design History Files (DHF) content, development, and management
Device Master Records (DMR) content, development, and management
Device History Record (DHR) content, development, and management
Applying lean principles to creating, developing, and managing a DHF
Applying lean principles to creating, developing, and managing a DMR
Applying lean principles to creating, developing, and managing DHRs
Who will benefit: Managers, Supervisors, Directors, and Vice-Presidents in the areas of:
R&D
Manufacturing Engineering
Quality Assurance
Operations
Document Control
José Mora is a Principal Consultant specializing in Manufacturing Engineering and Quality Systems. For over 29 years he has worked in the medical device industry specializing in manufacturing, process development, tooling, and quality systems. Prior to working full time as a consulting partner for Atzari Consulting, José served as Director of Manufacturing Engineering at Boston Scientific and as Quality Systems Manager at Stryker Orthopedics, where he introduced process performance, problem solving, and quality system methodologies. During that time he prepared a white paper on the application of lean manufacturing methods to the creation and management of controlled documents and a template for strategic deployment. José led the launch of manufacturing at a start-up urology products company as Director of Manufacturing for UroSurge, Inc. at the University of Iowa’s business incubator park in Coralville, IA, creating a world-class medical device manufacturing operation, with JIT, kanban systems, visual workplace and lean manufacturing practices. José worked for 10 years at Cordis Corporation, now a Johnson & Johnson company, where he led the successful tooling, process development and qualification of Cordis’ first PTA (percutaneous transluminal angioplasty) catheter. His medical device experience includes surgical instruments, PTA & PTCA dilatation and guiding catheters, plastic surgery implants and tissue expanders, urology implants and devices for the treatment of incontinence, delivery systems for brachytherapy, orthopaedic implants and instruments, and vascular surgery grafts and textiles. During his time at Cordis, José managed the Maintenance and Facilities Department, taking that operation to a level rated as “tops” by the UK Department of Health and Social Services (DHSS) during one of their intensive audits. Jose managed Manufacturing Engineering as part of the Guiding Catheter Core Team of managers, a team that took the Cordis Guiding Catheter business to lead the market, bringing it up from fourth place. By introducing world-class techniques, the Guiding Catheter design and manufacturing was completely re-engineered for robust design and tooling, under Jose’s leadership. He was also instrumental and played a leadership role in the complete re-engineering of the Tooling Control System, including design drafting, the tool shop and technical support. Wherever he has worked, he has a track record of introducing world-class methodologies such as Kepner-Tregoe, Taguchi techniques, Theory of Constraints, Lean Manufacturing, Five Ss (Visual Workplace), process validation to GHSS standards, and similar approaches.
Price List:
Live : $245.00
Corporate live : $495.00
Recorded : $295.00
Phone: 800-447-9407
Fax: 302-288-6884
webinars-AT-globalcompliancepanel.com
http://www.globalcompliancepanel.com
http://alturl.com/kcyxc
Other CFPs
- FDA's New Enforcement Practices of 21 CFR Part 11 - Webinar By GlobalCompliancePanel
- Complaint Handling and Management: From Receipt to Trending
- Bullet-Proof CAPA - Webinar By GlobalCompliancePanel
- Software Validation Planning for Executives and Managers - Webinar By GlobalCompliancePanel
- Software V&V Protocols and Documentation - Webinar By GlobalCompliancePanel
Last modified: 2012-06-28 13:45:28