2012 - 12th International Conference RESEARCH AND DEVELOPMENT IN MECHANICAL INDUSTRY

Topics
? Research and development of manufacturing systems,
tools and technologies, new materials and product design;
? Tribology;
? Maintenance and effectiveness of technical systems;
? Quality management, ISO 9000, ISO 14000, TQM and
management in mechanical engineering;
? Application of information technologies and electronics in
mechanical engineering:
? Transport systems and logistics and
? Application of mechanical engineering in other industrial
fields.
Technical presentations
For the firms, which want to present their products,
technologies and services, the presentation space has been
provided. It will be possible to promote scientific books,
technical information and other propaganda materials.
Participation
Participation fee for authors and participants is 80, - EURO
(proceedings, CD-ROM, other printed materials, cocktails,
conference dinner and picnic).
For presentation firms the participation fee is 500, - EURO.
Important dates
August 20, 2012 Deadline for papers submission
August 25, 2012 Acceptance of papers by the International
Scientific Committee
August 30, 2012 Final programme
Information for authors
Papers will be printed in Proceedings on CD-ROM in
electronic form and/or in hard copy. Some selected papers
will be printed in International Journal.
Papers must be submitted in English language only.
It is necessary to send paper on max 10 pages until August-20-2012. The final paper must be camera-ready format in Word
by form of papers.
Paper size: 10 pages, A4 format
Margins: All margins are 2,5 cm.
Font: Times New Roman
Title of paper: All caps 14 pt Bold
Title of chapter: All caps 11 pt Bold
Text of paper: Small caps 11 pt
Abstract for paper: 10 pt Italic
Key words: 10 pt Italic
Spacing: Single line spacing
Send: Final paper send by e-mail: dasicp58-AT-gmail.com
and satcip-AT-yahoo.com.
Information and address for corresponding
Person for correspondence is:
Predrag Dašić, SaTCIP Ltd.
Tržni Centar Pijaca 106, 36210 Vrnjačka Banja, Serbia
Tel/fax: +381 36 622454,
Mobtel: +381 60 6926690 and +381 63 648855,
E-mail: dasicp58-AT-gmail.com and satcip-AT-yahoo.com,
Website: http://www.RaDMI.org/.
The First Conference ″Research and Development in Chemical and
Mechanical Industry″ - RaDMI 2001 was held upon the initiative of
Predrag Dašić and prof. dr Miroslav Radovanović in Kruševac from
October 22-24, 2001.
Until now, 11 conferences were realized. More than 2.000 papers
were accepted and published, from which 1.300 were from 40 foreign
countries of the world. Total number of authors and coauthors was
over 2.500. Papers of the 11 conferences were published in 20
proceedings in hard copy and 10 proceedings in electronic form (CD-ROM). Amount of printed material was approximately 16.000 pages.
Some papers from the 8th International conference RaDMI 2008 will
be printed in special issue of international journal from SCI-E list
″Strojniški Vestnik ? Journal of Mechanical Engineering″ Vol. 55, no.
2 (2009) (Web site: http://en.sv-jme.eu/).
The 12th
International Conference ″Research and Development in
Mechanical Industry″ - RaDMI 2012 will be held on 14-17.
September 2012, in Vrnjačka Banja, Serbia, in honor of 50 years
(1962-2012) of High Technical-Mechanical School in Trstenik.
ORGANIZING COMMITTEE
1. Predrag Dašić, SaTCIP Ltd., Vrnjačka Banja (Serbia),
Chairman
2. Mr Dragan Trifunović, director, High Technical Mechanical
School, Trstenik (Serbia), Vice-chairman
3. Dr Milutin Milosavljević, University of Priština ? Office
Kosovska Mitrovica, Technical Faculty, Kosovska Mitrovica
(Serbia)
4. Dr Vladeta Jevremović, High Technical Mechanical School,
Trstenik (Serbia)
5. Mr Ljiljana Pecić, High Technical Mechanical School,
Trstenik (Serbia)
6. Marina Stanojević, University of Niš, Faculty of Economics,
Niš (Serbia)
7. Dr Slobodan Radosavljević, Mining Basin ″Kolubara″,
Lazarevac (Serbia)
8. Mr Veis Šerifi, Technical Faculty, Čačak (Serbia)
9. Jovan Dašić, SaTCIP Ltd., Vrnjačka Banja (Serbia)
10. Danka Milićević, SaTCIP Ltd., Vrnjačka Banja (Serbia)
SCIENTIFIC COMMITTEE
1. Prof. dr Grigoryev Sergey Nikolaevich, rector, Moscow State Technological University
″STANKIN″, Moskva (Russia), Chairman
2. Prof. dr Valentin Nedeff, rector, University of Bacău, Faculty of Engineering, Bacău
(Romania), Vice-chairman
3. Prof. dr Friedrich Franek, University of Vienna and president of Austrian Tribology
Association, Vienna (Austria), Vice-chairman
4. Prof. dr Raycho Ilarionov, rector, Technical University of Gabrovo (Bulgaria), Vice-chairman
5. Dr Syed Ahmed, CSEM S. A., Surface Engineering Division, Neuchâtel (Switzerland)
6. Prof. dr Emilia Assenova, Technical University of Sofia, Sofia (Bulgaria)
7. Prof. dr Anatoly P. Avdeenko, Donbass State Engineering Academy (DSEA), Kramatorsk
(Ukraine)
8. Prof. dr Milun Babić, University of Kragujevac, Faculty of Mechanical Engineering,
Kragujevac (Serbia)
9. Prof. dr Nada Barac, University of Niš, Faculty of Economics, Niš (Serbia)
10. Prof. dr Rade Biočanin, University of Novi Pazar, Technical Faculty, Novi Pazar (Serbia)
11. Prof. dr Konstantin D. Bouzakis, Aristoteles University of Thessaloniki, Faculty of
Mechanical Engineering, Thessaloniki (Greece)
12. Prof. dr Miodrag Bulatović, University of Podgorica, Faculty of Mechanical Engineering,
Podgorica (Montenegro)
13. Prof. dr Traian Buidoş, University of Oradea, Faculty of Management and Technological
Engineering, Oradea (Romania)
14. Prof. dr Mikhail V. Burmistr, academician, rector, Ukrainian State University of Chemical
Engineering, Dniepropetrovsk (Ukraine)
15. Prof. dr Alexander I. Burya, academician, Dniepropetrovsk State Agrarian University,
Dniepropetrovsk (Ukraine)
16. Prof. dr Sorin Ciortan, University of Galati, Faculty of Mechanical Engineering, Galati
(Romania)
17. Prof. dr Ilija Ćosić, dean, University of Novi Sad, Faculty of Technical Scientific, Novi Sad
(Serbia)
18. Prof. dr Predrag Ćosić, University of Zagreb, Faculty of Mechanical Engineering Naval
Architecture, Zagreb (Croatia)
19. Prof. dr Alexandre Dolgui, Ecole Nationale Supérieure des Mines de Saint-Etienne, Saint-Etienne (France)
20. Prof. dr Ćemal Doličanin, rector, University of Novi Pazar, Technical Faculty, Novi Pazar
(Serbia)
21. Prof. dr. Branislav Dragović, vice-dean, Maritime Faculty, University of Montenegro, Kotor
(Montenegro)
22. Prof. dr Ljuben Dudesku, University of Skopje, Faculty of Mechanical Engineering, Skopje
(Macedonia)
23. Prof. dr Petru Dusa, Technical University ″Gh. Asachi″, Faculty of Mechanics, Iaşi
(Romania)
24. Prof. dr Ljubodrag Đorđević, High Technical Mechanical School, Trstenik (Serbia)
25. Prof. dr Vladan Đorđević, academician, University of Belgrade, Faculty of Mechanical
Engineering, Belgrade (Serbia)
26. Prof. dr Sabahudin Ekinović, rector, University of Zenica, Faculty of Mechanical
Engineering, Zenica (Bosnia and Herzegovina)
27. Prof. dr Volodymir A. Fedorinov, rector, Donbass State Engineering Academy (DSEA),
Kramatorsk (Ukraine)
28. Prof. dr Anatoly N. Fesenko, vice-rector, Donbass State Engineering Academy (DSEA),
Kramatorsk (Ukraine)
29. Prof. dr Milomir Gašić, University of Kragujevac, Faculty of Mechanical Engineering,
Kraljevo (Serbia)
30. Prof. dr Manfred Geiger, University Erlangen-Nuremberg, Erlangen (Germany)
31. Prof. dr Anatoly Ivanovich Grabchenko, National Technical University, Kharkov
Polytechnical Institute, Kharkov (Ukraine)
32. Prof. dr Nicolae Valentin Ivan, University Transilvania of Brasov, Faculty of Mechanical
Engineering, Brasov (Romania)
33. Prof. dr Isak Karabegović, dean, University of Bihać, Technical Faculty, Bihać (Bosnia and
Herzegovina)
34. Prof. dr Baki Karamiş, Erciyes University, Faculty of Mechanical Engineering, Kaysei
(Turkey)
35. Prof. dr Branko Katalinić, University of Vienna, Vienna (Austria)
36. Prof. dr Veijo Kauppinen, Helsinki University of Technology, Espoo (Finland)
37. Prof. dr Marianna Kazimierska - Grebosz, Technical University of Lodz, Faculty of General
Mechanics, Lodz (Poland)
38. Dr Sergei A. Klimenko, Director of Association of Mashine ? Bulding Technologists of the
Ukraine - ATMU, Kiev (Ukraine)
39. Prof. dr Karel Kocman, Technical University of Brno, Brno (Szech Republic)
40. Prof. dr Janez Kopac, University of Ljubljana, Faculty of Mechanical Engineering, Ljubljana
(Slovenia)
41. Prof. dr Viktor D. Kovalov, Donbass State Engineering Academy (DSEA), Kramatorsk
(Ukraine)
42. Prof. dr Marian Kralik, vice-dean, Slovak University of Technology, Faculty of Mechanical
Engineering, Bratislava (Slovakia)
43. Prof. dr Zdravko Krivokapić, vice-dean, University of Podgorica, Faculty of Mechanical
Engineering, Podgorica (Montenegro)
44. Prof. dr Janos Kundrak, University of Miskolc, Faculty of Production Engineering, Miskolc,
(Hungary)
45. Prof. dr Valeriy V. Kuzin, Moscow State Technological University ″STANKIN″, Moskva
(Russia)
46. Prof. dr Cristian N. Madu, Pace University, Lubin School of Bussiness, New York (USA)
47. Prof. dr Velibor Marinković, University of Niš, Faculty of Mechanical Engineering, Niš
(Serbia)
48. Prof. dr Vlatko Marušić, University of Osijek, Mechanical Engineering Faculty, Slavonski
Brod (Croatia)
49. Prof. dr Ostoja Miletić, vice-rector, University of Banja Luka, Faculty of Mechanical
Engineering, Banja Luka (Bosnia and Herzegovina)
50. Prof. dr Nikolay K. Myshkin, director, V.A. Belyi Metal Polymer Research Institute (MPRI),
Gomel (Belarus)
51. Prof. dr Onisifor Olaru, dean, University ″Constantin Brancusi″ of Tg-Jiu, Faculty of
Engineering, Tg-Jiu (Romania)
52. Prof dr Constantin Oprean, rector, ″Lucian Blaga″ University of Sibiu, Sibiu (Romania)
53. Prof. dr Liviu Palaghian, University of Galati, Faculty of Mechanical Engineering, Galati
(Romania)
54. Prof. dr. Nam Kyu Park, Tongmyong University, Busan (Korea)
55. Prof. dr Jozef Peterka, vice-dean, Slovak University of Technology, Faculty of Material
Sciences and Technology of Trnava, Trnava (Slovakia)
56. Prof. dr Geanina Podaru, University of Galati, Faculty of Mechanical Engineering, Galati
(Romania)
57. Prof. dr Narcisa Popescu, University ″Politehnica″, Bucharest (Romania)
58. Prof. dr Stanislaw Pytko, Technical University of Krakow, Krakow (Poland)
59. Prof. dr Snežana Radonjić, University of Kragujevac, Technical Faculty, Čačak (Serbia)
60. Prof. dr Miroslav Radovanović, University of Niš, Faculty of Mechanical Engineering, Niš
(Serbia)
61. Prof. dr Georgi Rashev, dean, Technical University of Gabrovo, Faculty of Mechanical
Engineering, Gabrovo (Bulgaria)
62. Prof. dr. Dong-Keun Ryoo, College of International Studies, Korea Maritime University,
Busan (Korea)
63. Prof. dr Igor Sergeevich Sazonov, rector, Belarusian-Russian University (BRU), Mogilev
(Belarus)
64. Prof. dr Adolfo Senatore, University of Salermo, Faculty of Mechanical Engineering,
Fisciano (Italy)
65. Prof. dr Vladimir P. Sergienko, director, V.A. Belyi Metal Polymer Research Institute
(MPRI), Gomel (Belarus)
66. Prof. dr Dimitri Yu. Skubov, State Technical University of Sankt Petersburg, Sankt
Petersburg (Russia)
67. Prof. dr Georgy Slynko, academician, Zaporozhye National Engineering University,
Zaporozhye (Ukraine)
68. Prof. dr Mirko Soković, University of Ljubljana, Faculty of Mechanical Engineering,
Ljubljana (Slovenia)
69. Prof. dr Viktor Starkov, Moscow State Technological University, Moscow (Russia)
70. Prof. dr Ljubodrag Tanović, University of Belgrade, Faculty of Mechanical Engineering,
Belgrade (Serbia)
71. Prof. dr Peter M. Talanchuk, academician, National Technical University of Ukraine, Kyiv
Polytechnic Institute (KPI), Kyiv (Ukraine)
72. Prof. dr Oleg Vasilevich Taratynov, academician, Moscow State Industrial University,
Moscow (Russia)
73. Prof dr Mihail Titu, ″Lucian Blaga″ University of Sibiu, director of Intellectual Property
Department, Sibiu (Romania)
74. Prof. dr Mirela Toth-Tascau, Politehnica University of Timişoara, Faculty of Mechanical
Engineering, Timişoara (Romania)
75. Prof. dr Nikolaos Vaxevanidis, Institute of Pedagogical & Technological Education, N.
Heraklion Attikis (Greece)
76. Prof. dr Karol Velisek, Slovak University of Technology, Faculty of Material Sciences and
Technology of Trnava, Trnava (Slovakia)
77. Prof. dr Nataliya Vodolazskaya, vice-dean, Donetsk National Technical University (DNTU),
Donetsk (Ukraine)
78. Prof. dr Edward Walicki, University of Zielona Gora, Faculty of Mechanics, Zielona Gora
(Poland)
79. Prof. dr Ton vad der Wiele, Erasmus University, Rotterdam School of Management,
Rotterdam (Netherlands)
80. Prof. dr Carol Zoller, University of Petrosani, Faculty for Mechanical and Electrical
Engineers, Petrosani (Romania)