SCET 2025 - The 14th Spring World Congress on Engineering and Technology (SCET 2025)

The 14th Spring World Congress on Engineering and Technology (SCET 2025)
Website：https://scetconf.org/conference/scet2025/
Date：April 19-21, 2025
Venue： Guilin, China
The 14th Spring World Congress on Engineering and Technology (SCET 2025) will be held on April 19-21, 2025 in Guilin, China. It is composed of 3 Symposiums on the frontier topics in the engineering and technological subjects. It dedicates to facilitating the global development of engineering and technology and exploring ways in which the latest research results can be shared.
Symposiums:
2025 Spring International Conference on Material Sciences and Technology (MST-S)
2025 Spring International Conference on Textile Science and Engineering (CTSE-S)
2025 Spring International Conference on Mineral Processing and Metallurgical Engineering (MPME-S)
Attendance Methods
1.Regular Attendance ( No Submission Required )
You're also welcome to attend our conference (without submitting full paper or abstract)
2.Abstract submission
Submit abstract ( Regular Attendance + Abstract + Presentation )
You are welcome to submit abstract for oral presentation or poster presentation.
3. Full Paper submission
Submit full paper ( Regular Attendance + Paper Publication + Presentation )
You are invited to submit papers and participate in our academic exchange. One author will be invited to make an oral presentation and the paper will be published by peer-reviewed open access journal.
Publication and Presentation
Part I
2025 Spring International Conference on Material Sciences and Technology (MST-S)
Publication: The papers of MST-S will be published by TTP publishing in Switzerland and submitted to Ei Compendex databases for indexing. TTP publishing will not accept full paper submissions since February 7, 2025. If you still would like to publish the full paper, you can check another international English journal without EI indexing.
Abstract submission and simple attendance (without presentation) is still accepted.
Part II
2025 Spring International Conference on Textile Science and Engineering (CTSE-S)
2025 Spring International Conference on Mineral Processing and Metallurgical Engineering (MPME-S)
All the accepted papers of CTSE-S and MPME-S in English will be published by a peer-reviewed open access journal submitted to CNKI for indexing that can ensure the widest dissemination of your published work. You will get the hardcopy of the journal on the conference. For more information, please contact us (scet_service-AT-163.com).
Submission Note:
1. Manuscripts should be submitted by one of the authors of the manuscript through the online registration/submission system or official email.
2. If you want to present your research results but do NOT wish to publish a paper, you may simply submit an Abstract only.
3. All manuscripts are expected to be prepared as a single PDF or MS Word document with the complete text, references, tables and figures included. Any revised manuscripts prepared for publication should be sent as a single editable Word document. LaTex paper is also acceptable for publication, but it should be in PDF for review first.
4. Please click Template for Manuscripts button to download the Full Paper template and prepare your article according to it. If your paper is over the page limit, you will be kindly requested to pay for extra pages fees.
5. The simple Abstract submission should include the title, contents, keywords, authors names, affiliations and emails. The length is suggested to be controlled within 1 page and no more than 2 pages.
6. You will receive the review results within 5-7 working days after submission. If you do not get any notification within the time limit, please contact us as soon as possible.
7. You are welcome to submit papers in Chinese and please contact us for more details.
Contact Us
Email: scet_service-AT-163.com
Whatsapp: 0086 18672346485
Tel : +86 18672346485
QQ: 741494290
1349406763
Wechat(微信): 3025797047
Topics: The conference is soliciting state-of-the-art research papers in the following areas of interest:
MST-S
Fundamentals of Materials Science
Materials Physics and Chemistry
Mechanics of Materials
Phase change of Materials
Surface and Interface of Materials
Texture, Structure, Defect and Performance of Materials
Metallography
Ceramography
Polymer Materials Science
Computational Materials Science
Innovations in Materials Technology
Design, Modeling and Simulation of Materials
Materials Synthesis/Manufacturing
Materials Processing Technology
Welding and Joining
Surface Treatments and Coatings
Failure and Protection of Materials
Materials Testing and Analysis
Thin Film Materials and Technology
Energetic Materials and Technology
Function Test and Evaluation Technology
Packaging Technology
Green Technology
Applications of Materials Science and Technology
Polymeric Materials (Plastics, Rubbers, Fibers, Coatings, etc. )
Inorganic Nonmetallic Materials (Glasses, Ceramics, Cement, etc. )
Metallic Materials (Metals and Alloys)
Advanced Composite Materials
Refractories and Hard Materials
Nanomaterials
Biomaterials
The secretary of MST-S 2025
E-mail: scet_service-AT-163.com
CTSE-S
Acrylic and elastomeric fibers
Apparel and Handicrafts
Basic (cationic) and direct dyes
Bleaching
Chemical constitution and color
Clothing science and technology
Color, color specification and color matching
Cotton, flax, viscose and cellulose acetates
Determination of mixture of fibres
Disperse and mordant dyes
Dyes, acid and azoic dyes
Fabric preparation
Fabric technology
Fashion and textile product design
Fiber polymers and fiber properties
Fiber science and smart textile
Fibers, dyes and color chemistry
Garment industry and merchandise
Nano Textiles
Narrative textile Art and Craft
Natural dyes and dyeing
Nonwoven
Nylon and polyester fibers
Optical properties of textile fibers
Reactive, sulfur and vat dyes
Spinning, weaving and knitting
Technical Textiles
Textile Chemistry and Finishing
Textile Dyeing and Printing
Textile fibres
Textile materials and processing
Textiles industry
The cellulosic fibers
The protein fibers
The synthetic fibers
Wool and silk
The secretary of CTSET-S 2025
E-mail: scet_service-AT-163.com
MPME-S
Adhesion, interfacial strength and fracture
Adiabatic and isothermal process
Amorphous and nanocrystalline metallic alloys
Atomistic and microstructural aspects of plastic deformation
Corrosion
Coupling of phase transformations and plasticity
Craft of metalworking
Cyclic deformation and fatigue
Electrostatic separation
Enthalpy
Entropy
Extractive metallurgy
Ferrous and non-ferrous alloys
Foundry, pressure processing, welding and Cutting
Gibbs phase rule
Heat treatment of metallic alloys
Hess’s law
High Strength Alloys
High temperature deformation and creep
Kirchhoff’s law
Magnetic separation
Magnetocaloric and magnetic properties of metallic alloys
Mechanical, physical, and chemical properties of metallic alloys
Metal forming
Metal Materials
Metal Processing
Metallic alloys
Metallic elements and their intermetallic compounds
Metallurgical and Material Engineering
Metallurgical Technology
Metallurgical testing
Metallurgical thermodynamics
Metallurgy and mineralogy
Metalworking processes
Mineral Processing
Mining and Safety
Mining Machinery and Automation
Mining Technique
Petroleum Engineering
Phase diagram
Physical metallurgy for metallic alloys
Plating
Reservoir Engineering
Statistical thermodynamics
Surface and structural stability of metallic alloys
Surface Phenomena
Technology of metals
Thermal spraying
Thermodynamic equilibrium
The secretary of MPME-S 2025
E-mail: scet_service-AT-163.com