2011 - The 2nd International Conference on Advanced in Materials and Manufacturing Processes (ICAMMP 2011)

The 2nd International Conference on Advanced in Materials and Manufacturing Processes (ICAMMP 2011)
December 16-18th, 2011, Guilin, Guangxi, China

Co-organizer:
University of Wollongong
Northeastern University;
Beijing University of Technology
Hebei United University
Hong Kong Industrial Technology Research Center

The 2nd International Conference on Advances in Materials and Manufacturing Processes (ICAMMP 2011), co-organized by University of Wollongong, Northeastern University, Beijing University of Technology, Hebei United University and Hong Kong Industrial Technology Research Center will take place on December 16-18th, 2011 at Guilin, Guangxi, China. It serves as good platforms for academics, researchers, and engineers to meet and exchange innovative ideas and information on all aspects of material technologies.

Topics of interest for submission include, but are not limited to:
(I) New Materials and Advanced Materials
(II) Manufacturing Processes and Systems
(III) Automation and Equipment Manufacturing
(IV) Other related topics

All accepted papers will also be published on international journal “Advanced Materials Research” and will be indexed in EI Compendex, Thomson ISI databases and Elsevier SCOPUS etc. Selected excellent papers will be published on international reputation journals：
Open Mechanical Engineering Journal（EI）
Open Materials Science Journal（EI）
International Journal of Materials and Product Technology(SCI)
Materials and Manufacturing Processes(SCI)
Sensor Letters (SCI)
Important dates:
Deadline for full paper submission: September 1st, 2011
http://www.icammp.org/Index.asp
E-Mail ：ICAMMP-AT-188.COM

The 1st International Conference on Advances in Materials and Manufacturing Processes (ICAMMP 2010) was successfully held from November 6-8, 2010 in Shenzhen, China. Delegates from more than 20 countries or districts attended this conference. All accepted papers was published on Advanced Materials Research journal and had been indexed in EI Compendex databases.

Co-Chairmen

Prof. Zhengyi Jiang, University of Wollongong, AU

Prof. Xianghua Liu, Northeastern University, China

Prof. Jingtao Han, University of Science and Technology Beijing

Prof. Sihai Jiao, Research Institute, Baosteel, China

Prof. Jinglong Bu, Hebei Polytechnic University, China

Local Committee Chair

Dr. Mark Fong, Hong Kong Industrial Technology Research Centre

Technical and Organizing Committee

Prof. Liqun Ai, Hebei United University, China
Prof. Jinglong Bu, Hebei United University, China
Prof. Daolun Chen, Ryerson University,Canada
Prof. Yongjin Chen, Kunming Univ. of Science of Technology, China
Prof. Weixing Chen,Xi'an Technological University, China

Prof. Jiwei Cai, Hebei United University, China

Prof. Wenbo Du, Beijing University of Technology, China

Prof. Huili Ding, Hebei University of Technology, China
Prof. Xianjin Yu, Shandong University of Technology, China
Prof. Ming Dong, Shanghai Jiao Tong University, China
Prof. Xiaoxing Feng, Hebei University of Technology, China
Prof. Wenzhi Fu, Jilin University, China
Prof. Zhengping Fang, Zhejiang University, China
Prof. Jian Gao, Guangdong University of Technology, China
Prof. Jing Guo, Dalian Polytechnic University, China
Prof. Kai Gu, Beijing Institute of Petrochemical Technology
Prof. Yin Biao Guo, Xiamen University, China
Prof. Zhaohui Huang, China University of Geosciences, China
Prof. Junjie Hao, University of Science & Technology Beijing , China
Prof. Julong He, Yanshan University, China
Prof. Xingang Hou, Lanzhou Uinversity of Technology, China
Prof. Jingtao Han, University of Science & Technology Beijing , China
Prof. Xiaoming Jia, Hebei United University, China
Prof. Xiaolin Jia, Zhengzhou University, China
Prof. Zhenglian Jiang, Research Institute, Baosteel, China
Prof. Sihai Jiao, Research Institute, Baosteel, China
Prof. Shanqing Li, Research Institute, Baosteel, China
Prof. Xianghua Liu, Northeastern University, China

Prof. Jiacheng Liu, Tianjing University, China
Prof. Kaiqi Liu, Iron&Steel Reserch Institute, China
Prof. Yaqing Liu, North University of China
Prof. Jialu Li, Tianjin University of Technology, China
Prof. Yungang Li, Hebei United University, China
Prof. Dehong Lu, Kunming University of Science and Technology
Prof. Changsheng Li, Northeastern University, China
Prof. Baochun Lu, Nanjing University of Science and Technology
Prof. Chenxu Lu, Insti. of Process Eng., Chinese Academy of Science
Prof. Yongcheng Lin, Central South University, China
Prof. Gaifei Peng, Beijing Jiaotong University, China
Prof. Dianli Qu, University of Science and Technology Liaoning
Prof. Junan Shen, Georgia Southern University, USA
Prof. Wenlei Sun, Xinjiang University, China
Prof. Junyou Shi, Qingdao University of Science&Technology,China
Prof. Zhiming Shi, Inner Mongolia University of Technology, China
Prof. Yi Shen, Hebei United University, China
Prof. Xiaoming San, Hebei United University, China
Prof. Xitang Wang, Wuhan University of Science and Technology
Prof. Jun Wang, Northeastern University, China
Prof. Qiang Wang, University of Jinan, China
Prof. Pengcheng Wang, Inner Mongolia University of Technology, China
Prof. Mingzhi Wang, Yanshan University, China
Prof. Jiuba Wen, Henan University of Science and Technology
Prof. Ming Wen, Hebei University of Technology, China
Prof. Kaiming Wu, Wuhan University of Science and Technology
Prof. Guoqing Xiao, xi'an University of Architecture and Technology
Prof. Peiyu Yan, Tsinghua University, China
Prof. Xiaoyan Yuan, Tianjin University, China
Prof. Shao Hui Yin, Hunan University, China
Prof. Rong Zhu, University of Science & Technology Beijing , China
Prof. Anping Xu, Hebei University of Technology,China
Prof. Daoyuan Yang, Zhengzhou University, China
Prof. Zepeng Zhang, China University of Geosciences, China
Prof. Chun Liang Zhang, Guangzhou University, China
Prof. Jianmin Zeng, Guangxi University, China
Prof. Ping Zou, Northeastern University, China
Prof. Shihong Zhang, The Institute of Metal Research, Chinese Academy of Sciences
Prof. Changsheng Zhao, Sichuan University, China

Prof. AKM Nurul Amin, International Islamic University, Malaysia

Prof. Carlos Caceres, The University of Queensland, Australia

Dr. Chunsheng Lu, Curtin University of Technology, Australia

Dr. Dongbin Wei, University of Wollongong, Australia

Prof. Geun Jo Han, Dong-A Univeristy, Korea

Dr. Gui Wang, The University of Queensland, Australia

Prof. Jong Kook Lee, Chosun University, Korea

Prof. Ken-ichi Manabe, Tokyo Metropolitan University, Japan

Prof. Jeng-Haur Horng, National Formosa University, Taiwan

Prof. Jia-Horng Lin, Feng Chia University, Taiwan
Prof. Indra Putra Almanar, Universiti Sains Malaysia

Prof. Kyung-Man Moon, Korea Maritime University, Korea

Dr. Mark Fong, Hong Kong Industrial Technology Research Centre

Prof. P. S. Pa, National Taipei University of Education, Taiwan

Prof. Sagar Kamarthi, Northeastern University, USA

Prof. Shahrum Abdullah, University Kebangsaan Malaysia, Malaysia

Prof. Toshio Haga, Osaka Institute of Technology, Japan

Prof. Walid Mahmoud Shewakh, Beni Suef university, Egypt

Prof. Yun-Hae Kim, Korea Maritime University, Korea

Dr. Yuentong Gu, Queensland University of Technology,

Prof. Yu-Shiang Wu, China Univerisity of Sci. and Tech., Taiwan

Prof. Heinz-Gunter, Brokmeier, Technische Universitat Clausthal,Germany

Prof. Zhengyi Jiang,University of Wollongong, Australia
Prof. Yun-Hae Kim, Korea Maritime University, Korea

Prof. Christian Kloc, Nanyang Technological University, Singapore

Prof. Jacques Noudem, CRISMAT laboratory, France

Mr. Mohammad Hadi Hafezi, National university of Malaysia, Malaysia